Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum and timber.

It is essential to clean and UPVC Window Repairs oil UPVC windows and doors regularly. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. You should take the time to make sure that your windows are in good working order.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the old panes. In this case you'll need to locate some plastic spacers that will aid the new pane in being able to fit properly into the window frame.

If you plan to attempt to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and uPVC window repairs protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor and could be trampled.

After the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and fix the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the gap is particularly large, you might think about the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. Over time, they can develop a variety of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll need open the window to access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after having moved your hinges. If you're happy with the fit, tighten the screws to ensure they stay in position.

If you can't reposition the hinges, you might require replacing the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loosen. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles can also become loose. Often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. You'll first need to close the window and perform an initial fitting. The corners of the sash need to align with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

It is essential to take action if you get up each morning to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the degrading of the structure of your home but also undermine your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be done by any DIY expert. Based on the severity of the issue the caulking that was used up may require removal before a new layer of caulk can be put on. It is important to keep in mind that when it comes to upvc window repairs; repairmywindowsanddoors.co.uk,, do avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more with the seal than the frame. This can be easily fixed by an uPVC window replacement expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it blows open with a breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. Changing a window hinge is essentially a very simple process, but it's easier to do when you have a person to help hold the frame up.

Make sure that the uPVC hinges open and close in the correct direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

The problem can be caused by opening the window incorrectly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be happy to give you advice.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows sticking and prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by various factors. The hinges, also because of wear and tear, could become misaligned. This causes gaps to develop between the sash and the frame. These can be easily repaired by giving them a good clean, but if they are beyond repair it might be necessary to get them aligned or replaced. Second, the interlock can also become disaligned. This happens on the hinge's side and might require to be cleaned. In some instances it is possible to replace these.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also reduce the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are usually fabric tubes filled with some sort of filler and can be placed on the top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

With a little maintenance and repairs, your upvc windows will continue to provide a great level of insulation and security for your home. It is important to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them than to repair them. If you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.