Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They do not decay or rust as timber and aluminum.

Cleaning and lubricating regularly upvc window repairs windows and doors is vital. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. You should take the time to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace and generally fit into frames of the past easily. If windows with double panes are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case you'll need to find some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

If you are going to try to remove the glass panes yourself, it is essential to wear the proper safety gear, including thick gloves and eye protection. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the home until a professional can come out and fix the window. This will also provide a barrier to prevent any criminals from getting into your home. If the gap between the window doctor and the door is significant, you may prefer a security screen that also includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they are susceptible to a range of problems including sagging. A sagging uPVC window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from worsening.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need open the window so that you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the size of the window, tighten the screws to secure them in place.

If you aren't able to move the hinges, you might require replacing the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles may also loosen up. Most often it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and then perform a test fitting. The corners of the sash need to be aligned with the casing joint. If it does not you can use a screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

It is crucial to act if you wake up every morning to find a smoky wall and floors that are wet. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. Most of the time, uPVC repair uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any DIY expert. Based on the severity of the issue the old caulking might need to be removed before a new layer can be put on. When it is time to uPVC repair, you should avoid over-caulking. This will make your window harder to clean and decrease its energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases you may need to think about replacing the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leakage originates from the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze, it may be the hinges that are at the fault. They can be easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. It's very simple to change a window hinge but it's much simpler if you have someone to help you to hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. This can be done by looking for the arrow on each hinge. This shows which way the window should open.

The issue can be caused by opening the window incorrectly or due to a poor installation at the factory. Sending us a picture via our website will often solve the issue. We are happy to offer assistance.

It is also essential to grease the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window open and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. The hinges may also become misaligned due to wear, creating a gap where the sash meets frame. If they are beyond repair, it could be necessary to have them realigned. The interlock may also become disaligned. It is located on the hinge's side and could require to be cleaned. In certain instances it might be necessary to replace these.

The second most frequent reason for draughts is window seals. They are prone to wear or damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen the possibility of draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder, these are typically fabric tubes which are filled with a type of filler. They can be positioned on the windowsill on top. They will help keep cold air out and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is crucial to recognize that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than repair them. So, if you're experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.