Double Glazing Door Lock Repairs

Is your uPVC window or door mechanism broken? Perhaps the handles on your uPVC windows and doors are not aligned properly or are difficult to use.

It's important that the double glazed doors function smoothly, or else you'll be wasting energy and increase the likelihood of burglary. Owen the Locksmith can fix your door lock at an affordable cost.

Snapped Key

It can be frustrating when a key snaps into a lock. It's also potentially a security risk since the door may not lock and leave you vulnerable to intruders. There are a few quick fixes you can make to resolve the issue and get your door working again.

Be calm. If you panic, you could end up pushing the broken key piece further into the lock.

Spray WD-40 or another penetrating lubricant, into the lock. This will allow the broken piece to come out more easily. You can also use a screwdriver to break any pieces that are stuck. If you have a part of the key that is still sticking out, grab it with a paperclip or another thin metal object and pull it. Both of these methods work, but be very careful not to push the broken piece of the key deeper into the keyway.

Some paperclips have grooved edges that can be used as a hook extractor and Jigsaw blades can also be used for this function. If you don't have any of them available, you can use needle-nose pliers to bend and create a hook. Also, Window Doctor Near Me a pair tweezers is a good way to grasp and pull out the remaining part of the broken key.

If you are unable to get the broken piece of the key out, try using a lock de-icer. It's available in many hardware stores and works by freezing any moisture that may be present in the lock.

If none of these strategies seem to be helping, it might be time to call locksmith. Fitlocks experts can quickly solve problems like broken handles and snapped keys using uPVC locks and door mechanisms. They can also modify your double glazing door mechanisms to make them more user-friendly. You can schedule repairs to your double-glazing online or call us to discuss your needs.

Broken Cylinder

A damaged cylinder can pose an extremely risky security issue. A professional locksmith is able to fix the cylinder. A locksmith must tap the cylinder in order to repair it. They can do this with an hammer or another tools, but the most effective way is to make use of a long match or a piece of wire. Then, place the match's tip or wire close to the keyway. The locksmith will then hit the lock to break it. This is much better than using a heavy hammer, which could cause damage to the lock.

Overheating is the primary cause of cylinder heads cracking. This can happen when the block and the cylinder head are made from different metals such as cast-iron and aluminium. Different metals can heat up and cool down at different rates. This could cause localized hotspots to expand quicker than the rest.

Another reason that could cause cracks in the cylinder is corrosion. If the head and block of a cylinder are not maintained in a timely manner they could be corroded or rust, which can cause them to expand faster than anticipated. This can lead to cracks as time passes.

If your uPVC window or door lock is stiff and requires a lot of pressure to turn it could be due to a variety reasons. This issue could result from a defective locking mechanism or misalignment or a worn-out handle.

This is a straightforward and inexpensive fix that most homeowners with double glazing can perform. A professional locksmith will usually fix this problem within one hour of arriving at the home. They can fix the locking mechanisms, or Window Doctor Near Me change the window handles and change the gearboxes, based on your specific needs. A professional locksmith can always advise you on the most cost-effective solution for your home. They can even suggest upgrades to high-security 3 Star Euro cylinders, TS007, that will give you an additional layer of security against burglars. This is a small cost to pay for the peace of mind that comes with knowing your uPVC doors are safe.

Broken Handle

It's not a surprise that window handle locks can break. They have intricate mechanisms which deteriorate over time. If yours breaks it's difficult to identify the cause of the problem and make sure that you repair it correctly.

Whether the problem is with the internal locking mechanism or the latch, fixing the broken handle can improve your uPVC double glazing door's security as well as help you stop the draughts. It can be expensive to replace or repair your handle incorrectly and it can also harm the frame and the lock of your door.

Screwdriver Open the window remove the screw that holds the handle. The screw should be on the inside of the backplate, which is usually hidden by a screw cap to enhance the appearance. It is important to not lose any internal components of the handle such as the levers and plates on either side. Keep them in the same order to make it simpler to replace them in the event of a need.

Then, with an additional screwdriver loosen the screw that connects the handle to the spindle at the back. Once the screw is free, you can pull the handle out and take the broken spindle out. Replace it with a new one, making sure that it's the same size as the previous one (you can usually find these on the internet or in hardware stores) and then securely screw it into place. Do not tighten the screw too much as this could cause damage to the handle and window frame.

Make sure the new handle is correctly installed, then close and test the handle. It should work smoothly and you'll be able open your window once more.

While you're working on the handle, be sure to make sure your uPVC windows are shut properly. If they don't close properly, you could experience draughts or damp in your home. It could also affect the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of your window frames to ensure they close properly.

Broken Spindle

It is more likely for the spindle to break than the handle. This is most typical in uPVC tilt and turn windows. These windows require a handle that acts as a locking device in the window frame. The handle is attached to a rod in the centre that triggers a set of cams that resemble mushrooms, which locks are inserted into the window frame. If the dead latch mechanism is not able to open after the handle is turned, it is most likely the spindle is broken. This could be a frustrating issue.

Luckily there are ways to fix this problem. A good locksmith can quickly and effectively fix the issue. A good locksmith can disassemble the handle of the window Doctor Near Me by using a tool that removes the wheel from the area in which the spindle is. This can be done without damage to the handle or window frame.

After removing the wheel the technician can inspect the spindle and determine what caused it to break. This involves breaking down the spindle into its constituent parts and meticulously noting their general condition, as well as any specific areas of wear or damage. The process is done in a clean environment by highly skilled technicians.

The next step is to clean the damaged spindle, this assists in removing any debris or dirt that could be hindering its normal operation. After that, the spindle could be repaired or replaced. If it is being replaced the technician will need the dowel that is similar in size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the new spindle has precisely matched to the handle.

If the spindle is damaged and cannot be repaired, it might require replacement completely. Home centers sell generic replacements, but if your window style is rare, you will have to speak with an expert in cabinet making or woodworking who can replicate the exact piece. Once the spindle has been installed, it is fixed to the handle. Line up the screw holes on the handle to the existing screws in the frame. Once the new handle is firmly seated you will be ready to operate your uPVC window.