Repairs to uPVC Windows

uPVC windows are a great option for seals modern homes. They are easy to maintain, durable and long-lasting. They don't rot or rust like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. However when you have double pane windows that are held in place by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this case you'll need to locate some plastic spacers that will help the new pane to fit properly into the frame of the window.

If you plan to try to remove the window panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

It's a great idea to tape the gap once the glass is removed. This will keep drafts and water from entering your home until a professional comes out to fix the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap is large, you may want to consider using a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, over time they can suffer from a variety of issues, including sliding. A sagging window in uPVC could cause issues with light, draughts, and even security. It's crucial to act immediately if you discover that your uPVC windows are sagging.

To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows so you can reach the frame. After that, using a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in position.

If you cannot reposition the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and secure from draughts.

UPVC handles can also become loose. The majority of the time, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and do a test fitting. The corners of the sash need to be aligned with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is important to take action if wake up every morning to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the issue is, old caulking may need to be removed. When it comes to uPVC repair, it is important to be careful not to over-caulk. This will make your window more difficult to clean and reduce its energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with ease it could be the hinges that are at the fault. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. Changing a window hinge is essentially a simple procedure, but it is easier with someone else to help hold the frame in place.

Make sure that the uPVC hinges are open and closed in the correct direction. You can check this by checking for the arrows on each hinge, this indicates which way the window should be opened.

The issue could be caused due to opening the window in the wrong way or by a poor installation in the factory. Sending us a picture via our website will often resolve the problem. We are happy to provide suggestions.

It is also crucial to grease the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to open and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least every year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges may also become disaligned as a result of wear, which can cause a gap between the frame and sash. If they are damaged beyond repair, it may be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window, may also be misaligned, and again it's possible to just give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

These seals can wear down or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures and lessen the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They will help block out cold air and keep your home warm and cozy!

With a little maintenance and repairs your windows made of upvc window repair will continue to provide excellent security and insulation for your home. It is important to remember that all windows eventually become worn out, and it could be more cost-effective to replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it's recommended to seek assistance from a professional as soon as you can.